← Newsroom

Hydrogen turbines around the world: Where they have run—and what HyCoFlex adds

Hydrogen combustion in gas turbines has moved beyond laboratory testing. Demonstrations in Europe, Japan and the United States have generated electricity using pure hydrogen or hydrogen–natural gas blends. The important distinction is between successfully running a turbine on hydrogen and operating a commercially established hydrogen power plant.

Walerian Majewski ·

Siemens Energy SGT-400 Gas Turbine
Imagen: Hycoflex

The latest milestone comes from HyCoFlex in France, where an industrial turbine has demonstrated simultaneous electricity and steam production on 100% renewable hydrogen.

On 16 November 2026, Siemens Energy announced the completion of a test campaign at Smurfit Westrock’s paper mill in Saillat-sur-Vienne. The SGT-400 installation, capable of delivering up to 12 MW of electricity and 20 MW of heat, operated at full load on hydrogen. Testing also covered hydrogen-only ignition, start-up, grid synchronisation, load changes and shutdown, while maintaining low NOₓ emissions.

This extends the earlier HYFLEXPOWER work at the same site: the achievement concerns the complete operating cycle and integration with industrial steam production. It remains a demonstration milestone, rather than confirmation of continuous commercial operation on hydrogen.

Where else have turbines actually used hydrogen?

The following examples illustrate different scales and stages of deployment:

Kobe, Japan — Kawasaki / Obayashi

A roughly 1 MW-class cogeneration system supplied heat and electricity using 100% hydrogen in 2018. Dry low-NOₓ hydrogen combustion was subsequently verified in 2020.
Hydrogen-only cogeneration demonstrated at an urban site.

Takasago, Japan — Mitsubishi Power M501JAC

A grid-connected large-frame turbine, with rated power 453 MW, demonstrated 30% hydrogen by volume, blended with natural gas, at partial and full load in 2023.
Hydrogen blending validated in a large power-generation machine.

Takasago, Japan — Mitsubishi Power H-25

MHI reports confirmation of 100% hydrogen operation during actual-equipment verification in 2024.
Hydrogen-only operation demonstrated on a smaller industrial turbine platform at a validation facility.

Long Ridge, Ohio, US — GE 7HA.02

A March 2022 test used 5% hydrogen by volume at an operating 485 MW combined-cycle plant.
Hydrogen blending demonstrated within a commercial power station.

A further project has recently entered testing: RWE and Kawasaki’s 34 MW turbine in Lingen, Germany. Commissioning was announced on 6 November 2026, with a programme covering fuel mixtures up to 100% hydrogen.

Does cogeneration change the efficiency argument?

Converting electricity into hydrogen and then back into electricity incurs losses at each stage. But cogeneration adds a useful output: heat that would otherwise be rejected can supply an industrial process. At a paper mill with a sustained steam requirement, this creates an additional reason to consider hydrogen-fired generation.

HyCoFlex’s announcement does not provide a measured efficiency for the complete electricity-to-hydrogen-to-electricity-and-steam chain. Its demonstrated advance is operational: integrating hydrogen combustion, flexible turbine operation and steam recovery at an industrial site.

For project developers, the next questions are therefore practical: hydrogen supply and price, annual operating hours, reliable heat demand, maintenance requirements and competing electrification options. For equipment suppliers, these projects create concrete requirements for fuel conditioning, valves, seals, instrumentation, gas detection and control systems.

Each completed operating campaign helps turn those requirements into engineering evidence—and brings hydrogen turbines closer to applications where their flexibility and useful heat output can justify their cost.

Compartir artículoLinkedInFacebookXWhatsApp